Monster FlatScreen SuperThin Tilt Mount - Up to 63” Screen User Manual

SUPERTHIN™ LARGE TILT MOUNTSECURE, EASY TO INSTALL, LOW PROFILE TILTING MOUNT INSTALLATION MANUAL AND WARRANTY42"-63"(106-160cm)120 lbs.(54

10Masonry MountingMasonry mounting requires specialized knowledge, skills and tools. Monster highly recommends that you seek the help of a professiona

11Masonry Mounting (cont’d)4 Position the wall mounting plate over the holes drilled in the wall studs. 3 Install the supplied plastic concrete anchor

12Masonry Mounting (cont’d)6 With the help of another person, attach the wall plate to the wall using the lag bolts and round washers as shown to the

13Attaching Your Flatscreen TV to the Tilting Vertical Adjustment Bars1 Locate the threaded inserts on your TV’s back panel. Thread a screw from the

14Hanging Your Flatscreen TV and Tilting Vertical Adjustment Bars on the Wall Plate2With the help of another person, lift your TV up to mount level.

15Adjusting Tilt Angle of TVThe tilt angle can be adjusted up to 12°. To tilt down, gently pull the upper part of your TV away from the wall. At first

16Removing Your Flatscreen TV from the Wall PlateNote: A cord is attached to the bottom of each vertical adjustment bar. If it is necessary to remove

17More Great Products from Monster FlatScreen™ Get the Look You Want and the Performance You Need.For more details on all our Monster FlatScreen produ

18LIMITED WARRANTY FOR CONSUMERSMonster, LLC, 7251 West Lake Mead Blvd., Las Vegas, NV 89128, USA, [PLEASE NOTE THAT MONSTER DOES NOT ACCEPT PRODUCTS

19LIMITED WARRANTY FOR CONSUMERS (cont’d)JURISDICTION, AND WHICH SHALL NOT BE AFFECTED BY THIS LIMITED WARRANTY. THIS WARRANTY EXTENDS ONLY TO YOU AND

2This SuperThin mount is designed to mount 42"– 63" (106 – 160 cm) flatscreen televisions to vertical walls. Maximum weight capacity is 120 l

35.67" (14.4cm)2.43" (5.95cm)12°4.92" to 33.46" (12.5cm to 85cm)15.75" (40cm)19.36" (49.18cm)34.78" (88.6cm)16.93&q

44 Concrete Anchors 4 Lag BoltsPackage Contents If any parts are missing, please call the appropriate Monster number for your location. See page 2 fo

5WARNINGS A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions. (1) DO NOT install on a sloping su

6Required ToolsWall Stud Mounting Level (included) Electronic studfinder (included) Electric hand drill ³∕₁₆" drill bit Phillips screwdriver Wrenc

7Wood Stud MountingAn electronic studfinder is included. Remove plastic tab on the back of the studfinder to activate battery. To locate a wall stud,

8Wood Stud Mounting (cont’d)4 Position the wall mounting plate over the holes drilled in the wall studs. 3 With your electric drill and ³∕₁₆" bit

9Wood Stud Mounting (cont’d)6 With the help of another person, attach the wall plate to the wall using the lag bolts and round washers as shown to the